I reccomend the Curt # C57WR Universal Truck Bed Exender which will fit nearly all full size pickup trucks including Chevrolet, GMC, Ford, Dodge, Ram, and Nissan, with standard 60" wide tail gates. (6.5 foot and longer beds) and provide 26-1/2 inches of additional bed length for storage and hauling. May not work with flare-style tailgates. Compatible with most tonneau covers. view full answer...
The Topline Fold Down Truck Bed Extender, part # BX4004-02, is a universal-fit item, and will adjust to fit truck beds of differing widths. The bed extender when not extended and fully retracted measures 48 inches in overall width. You will need to check on your tailgate if you will have room to attach the mounting hardware.
I do not have any experience with it fitting on a 1965 Ford Ranchero, but to try and help you see if it will fit to your tailgate, I pulled the bed extender from the... view full answer...
The Erickson Truck Bed Ladder Rack # EM07705 will fit your 2017 Nissan Frontier but the rack on the rear of your bed will take up about an inch inside the rails. That being said I am not 100% sure if that will affect the extender rack system. I do know that this ladder rack # TH43001XT-603 will not interfere with your extender rack system. This rack sits on top of your bed rails so there will be no interference and it's much easier to move and remove the rack system so you can use your... view full answer...
The Erickson Big Bed Junior Load Extender - Roof or Truck Bed # EM07605 will allow you to carry your kayaks on your factory roof rack with the support you need at the back of your truck. The Load Extender has a load bar that is 51 inches wide and is adjustable in height from 55-1/4 inches to 62 inches tall from the bottom of the shank to the top of the crossbar. view full answer...
It is possible to use a hitch extender to get some added clearance along with a truck bed load extender like the
Erickson Big Bed JR Load Extender # EM07605.
Just make sure to keep in mind that hitch extenders are adapters, and they will reduce the capacity of your trailer hitch by 50 percent, including the tongue weight. So you may not be able to use the full capacity of the truck bed extenders, but if you just need it for lighter applications you can use an extender.
For either bed... view full answer...
There are many TorkLift Custom Frame-Mounted Camper Tie-Down options for a 2020 Chevrolet Silverado 3500. The correct ones will be determined based on bed length, cab size, SRW/DRW, and step option. If you would like to provide this info I would be glad to confirm the correct set otherwise you can simply choose these yourself by filtering the attached results using the above info.
TL44FR (C2226) Fits:
2020 - 2021 GMC Sierra 3500 8 Foot Bed - Dual Rear Wheels - without board or step underneath... view full answer...
The Extang Trifecta Signature 2.0 Soft Folding Tonneau Cover # EX94985 that you referenced is a confirmed fit on the 2018 Nissan Frontier Crew cab with 5-foot bed.
The bed extender we offer for your truck the Curt # and the black model # C57WR. This is compatible with tonneau covers like the Extang.
Truck bed extender lets you make full use of your truck bed by maximizing cargo storage space while promoting enhanced security. view full answer...
Currently the only truck bed extenders we carry are going to be for a 2" receiver like the Erickson Big Bed Load Extender # EM07600. We do have a Titan Hitch Box Extension # RP45018 which you can use to have a custom made extender. This 41" or 48" extension will allow for 400lbs of tongue weight at 48" or 500lbs at 41". This hitch box extension fits into a 2-1/2" receiver.
Otherwise you could have a Reducer # BX88187 welded to the 2" tube on the extender so you will not have to deal with... view full answer...
The Curt Universal Truck Bed Extender with Fold-Down Tailgate, part # C57WR, will close on your 2021 Chevrolet Silverado 1500. Provided you have the 6-1/2' bed. This extender adds 2' to your truck bed. You will not be able to carry 8' lumber, if you have the 5-3/4' truck bed, and close the gate. You will be about 4" short.
I have included a product review link below. view full answer...
I do have an option that will work with that application...it is the Yakima LongArm Truck Bed Load Extender - 2" Hitches - Aluminum - 300 lbs # Y01149. I've attached a photo to assist. The MaxxTow MaxxHaul Truck Bed and Roof Load Extender will not adjust to the height of the tonneau cover on your truck. view full answer...
The Curt # C57WR truck bed extender isn't a vehicle-specific item, so Curt doesn't test fits on specific vehicles.
If the inside of the tailgate opening (jamb to jamb) is 60-1/2 inches, the bed extender would fit. However, this extender is designed for full sized trucks, So it's almost certainly going to be too wide to fit.
If you were needing the extender for longer items such as lumber, a hitch mounted load extender like part # MPG907 could be a good choice for you, assuming you have... view full answer...
The Curt # C57WR Universal Truck Bed Extender should fit most trucks with a 60" tailgate width, and will provide you 26-1/2 inches of additional bed length. view full answer...
The Fold Down Truck Bed Extender part # BX4004-01 has a minimum width of 48" so if you have this much space between the two swinging bed side toolboxes while they are in the stored position then it will work.
The Fold Down Truck Bed Extender is the narrowest bed extender we offer so if this will still not allow you to fit between the swinging bed side toolboxes I am afraid they will need to be removed. view full answer...
The length of the truck bed extenders like the Erickson Big Bed Load Extender for 2" Hitches part # EM07600 are not adjustable. That said, all you would need to do is move the load away from the cab in order for it to rest on both the bed floor and crossbar. It could then be tied down to keep if from sliding back and forth inside the truck bed. view full answer...
The good news is that bed extenders rely on the trailer hitch receiver on your truck and they're not going to be vehicle specific-which is why they're not showing up in the fit guide for your specific vehicle. So, as long as you've got a 2" receiver like the Curt # 13138 on your 2001 Ford Ranger you'll be able to use the Malone # MPG907 without any issues. This bed extender will add up to 62" to your truck bed and will provide a nice, sturdy base to carry your 14 foot long kayak.
In order... view full answer...
The Curt Universal Truck Bed Extender with Fold-Down Tailgate # C57WR is a universal fit so it should be compatible with your 2007 Nissan, I just recommend checking the width of your bed to ensure fitment. This extender has an exterior width of 60", so if your bed is 60" or more in width you'll have no issues installing it.
I've also attached a video below that will help walk you through installation, but keep in mind your instructions may differ slightly just because the video is an... view full answer...
For a bed extender that will fit your 1996 GMC pickup (but does not have a step) you can use Curt # C57WR Universal Bed Extender. This will give you anohter 26-1/2 inches of bed storage space. view full answer...
The longest option is going to be the Malone Axis Truck Bed and Roof Load Extender for 2" Hitches # MPG907, which has a 53" length from the hitch pin hole to the furthest point on the extender. This extender comes with a 375lb load capacity but you'll still want to verify the tongue weight capacity of your truck's hitch.
Since you're wanting maximum length I recommend also picking up the Erickson Mesh Safety Flag w/ Bungee Cord # EM05308 as there typically are local or state laws about... view full answer...
The Curt Universal Truck Bed Extender with Fold-Down Tailgate # C57WR is designed as a universal fit and has been confirmed to fit Tacoma beds, regardless of length, in the past. I've attached a short video below where Bobby will walk you through the installation process. view full answer...
I spoke with my contact at Topline and she informed me that there is a good chance you would be able to accommodate your motorcycle that is 8 foot 2 inches long in the truck bed of your 2004 Toyota Tundra with this Fold Down Truck Bed Extender # BX4004-02.
You could make it work because you can install the mounting brackets to your tailgate in such a way that the entire system could be mounted as close to the edge of the tailgate as you would like. Basically, as long as the bed extender... view full answer...
Go To Results